What to Use on Car Tires For Detailing 

When it comes to detailing your car tires, there are plenty of different things you can use. However, there are some basic steps you need to follow before you begin. The goal is to have your tires look like new and to protect them from the elements. If you don’t follow these steps, your tires will quickly look dirty, and unsightly, and not be able to grip properly on the road. 

(Searching for “professional auto detailers“? Visit our website!)

There are a variety of tire dressings you can buy, including solvent-based and water-based. They come in matte or glossy finishes, and they are designed to enhance the appearance of your rubber. You can also buy a product called a sealant that will help protect your tires from UV rays and other environmental hazards. 

Most of these products are designed to be applied to your tire before driving, but you can also use them to wash your car tires. These products are made of acrylic or other polymers suspended in a solvent. Once they are diluted, they can be used to remove grime. This is especially useful for tires that have been neglected and are beginning to show signs of aging. 

Before you begin cleaning your tires, make sure they are completely cooled down. To avoid scratching, get a stiff brush. Soft brushes will not work as effectively and may leave ugly scratches on your tires. A medium-stiff brush is a good balance. Make sure you don’t spray the dressing on the tire before you start, or you will end up with a wet, sticky mess. 

Using a sponge, dip it in the solution. Scrub in circular motions until you are satisfied with the cleanness of the tire. Apply the dressing to the tires in thin coats. Dry the surface well with a towel, and you’re done! 

For a more detailed approach, try using a dedicated tire-washing mitt. It will help you reach areas that you cannot reach by hand. Alternatively, you can use a wheel brush. Both will scrub your tires and work the cleaner into the rims. 

Another option is to mix lemon oil with borax. You can then apply this mixture to your tires, and let it sit for a few minutes. Lemon oil is a good degreaser, and it will also give your tires a nice shine. 

Alternatively, you can use an all-purpose cleaner. This can be a good way to remove grime and rust. You can also mix dishwashing soap with borax and then use that mixture on your tires. But be sure to rinse the product off of your wheels after you’re finished. Otherwise, the soap could cause the clear coat to break down, which can damage your vehicle. 

Spray-on tire shine products can also be used to clean your tires. Be sure to apply them with a foam applicator, and don’t allow them to remain wet. That way, they’ll be easy to wipe off, and you won’t risk damaging your paint. 

Finally, don’t forget to dry the tire after you’ve finished cleaning it. This will help prevent any water spots from appearing.