What is Clay Used For When Detailing a Car? 

In short, clay is an absorbent substance that works to remove contaminants from your vehicle’s surface. It can help remove brake dust, dirt, and other grit that can be found on the outside of your vehicle. This can prevent your vehicle from rusting and also make it look better. 

The best part is that it is incredibly affordable! The only downside is that it can take a while to fully remove all the grit and other contaminants from your car. This can make it difficult to use when doing a full detail. 

Depending on the brand, you can purchase a clay bar with a lubricant or simply spray your own. The lubricant helps to keep the clay from sticking to the paint, preventing scratching and damaging your vehicle’s clear coat. 

There are many different types of clay available, and it is important to select one that will work well with your car’s finish. There are also synthetic clay bars that are easier to use and do a great job of removing contaminants from your vehicle’s surface. 

A good clay will remove even the toughest contaminants like road tar, bird poop, and other particles that can’t be removed by washing your car. It will also remove any mineral deposits that you may find on your vehicle, such as iron, that can corrode and damage the paint. 

Another advantage of using clay is that it can remove scratches and swirl marks from your paint’s surface. While this can be frustrating at times, it is essential to getting a flawless shine that will last for years to come. 

When claying your car, it is a good idea to use the same lubricant you are using on your other detailing products. This will help to ensure that your paint doesn’t get damaged as you are removing the contaminants from it. 

To start with, spray a generous amount of lubricant or detailer spray onto the painted surface of your car that you want to clay. You want to make sure that the lubricant is completely absorbed by your paint before you apply the clay. This will ensure that the clay bar glides easily over the paint without causing any damage. 

Once you have sprayed the lubricant or detailer spray on your paint, cut your clay into small pieces and lightly rub it over the surface in a back-and-forth motion. Repeat this process on other sections of your vehicle. 

It is very important to check the clay often for any hard particles that may be stuck to it. If any of these are left on the clay, discard them and replace them with a fresh piece of clay. 

You can also check your clay for any sand or other impurities that may be trapped in it. If you notice these, switch to a clean clay bar or a new clay bar to avoid marring your paintwork.